Trap Primer Valve is a diaphragm operated primer which delivers a fresh water prime to seldom used floor

drains. This primer requires no adjustment but must be installed on a cold fresh water line of 1 1/2" (38mm)

diameter or less. Primer valve is automatically activated when it senses a pressure drop of 10 PSIG (70 kpa).

Features:

·   Automatically maintains a constant water seal in floor drain traps.

·   Best for use with low flow fixtures, when potential pressure drop is reduced.

·   Automatically adjusts to line pressure with proper delivery amount.

·   Check Valve Ball: #316 - Stainless Steel Check Valve Ball Retainer Monel Metal

·   Slip Joint Nut - 1/2" NPT: Chrome Plated Brass

·   Slip Joint Nut Washer - Neoprene Strainer: 40 Mesh - Stainless Steel Wire Cloth

·   one model - for 1 up to 4 drain traps

·   The priming valve must have a minimum elevation of 12 inches above the finished floor.

·   CA/VT compliant