Features:

·   This innovative trap priming system automatically primes up to two floor drain traps using our patented water distribution system.

·   PRIME-RITE requires no adjustment but must be installed on a cold water line of 1-1/2" (38 mm)

   diameter or less.

·   The priming valve is automatically activated when it senses a pressure drop of 10 PSIG (70 kpa).

·   Automatically adjusts to line pressure

·   Machined from CDA 360 corrosion resistant brass

·   Does not contain springs, diaphrams, or plastic parts

·   The priming valve must have a minimum elevation of 12 inches above the finished floor.

·   CA/VT compliant