Plumbing > Pipe & Tubing > Polyethylene Pipe & Tubing > Oil Creek Plastics, Inc. > HeatFlex PE-RT Polyethylene Radiant Heating Pipe
| Additional Information | |
|---|---|
| Logo | Oil Creek Logo.tif |
| Coil Lengths (Ft) | 100 |
| Density lb/ft3 | 58.745 |
| ID | 0.485 |
| Modulus of Elasticity Psi | 138,511 |
| OD | 0.625 |
| Oxygen Diffusion Rate with O2 Barrier at 100°F Mg/in2x24h | Better than .0002 |
| Oxygen Diffusion Rate with O2 Barrier at 180°F Mg/in2x24h | Better than .00004 |
| Percentage of Elongation % | 760 |
| Tensile Yield (Psi) | 2.988 |
| Thermal | |
| Conductivity @ 140 °F BTU (h ft2F/in) | 2.7734 |
| Expansion Coefficient °F (680°F to 158°F) | 0.0000394 |
| Tube (in) | 1/2 |
| Ultimate Yield (Psi) | 5.221 |
| Water Content in Gal/ft | 0.0096 |
| Weight in lb/ft | 0.054 |
| WT | 0.070 |
Features:
· Heatflex tubing is a 5 layer tubing consisting of 2 layers of polyethylene copolymer resin (the inner and outer most layers), 2 layers of adhesive and one layer of EVOH (the oxygen barrier layer). This structure provides the outstanding hydrostatic design strength demanded by hydronic heating applications.
· The outer layer of polyethylene (DOWLEX 2344) provides a protective shield for the EVOH to ensure your radiant piping system has the best possible protection from oxygen permeation causing oxidation of the heating system.
