HVAC > Controls > Furnace Controls > HSI Controls > Honeywell
| Additional Information | |
|---|---|
| Logo | Honeywell.tif |
| Circulator Load | 14.5FLA / 25LRA max @120Vac |
| Cool Fan | |
| Off Delay | 0 or 60 seconds |
| On Delay | 5 seconds |
| Cooling Contactor Used With | Any 24Vac Contactor Rated at 1.0A or Less |
| Flame Failure Response Time | 2 Seconds max @ 1µA |
| Frequency | 60 Hz |
| Heat Off Fan Delay | 60, 90, 120, or 180 Seconds |
| Heat On Fan Delay | 30 or 60 seconds |
| HSI Warmup Time | 17/27 or 30/30 seconds |
| Igniter Current | 1.0A resistive @ 95Vac output |
| Ignition Trial Time | Three, Two Tries if Flame is not Sensed |
| Line Voltage | 120Vac (97-132 Vac) |
| Interpurge | 60 seconds |
| Voltage | |
| Low | 24V (18-30Vac) |
| Number of LEDs | 3 |
| Operating Ambient Temperature Range | -40°F to +175°F (-40°C to +79°C) |
| Operating Humidity Range | 0% to 95% Non-Condensing |
| PostPurge | 15 seconds |
| PrePurge | 30 seconds |
| Thermostat Anticipator Setting | (Stage 1 only) 100mA |
| Trial For Ignition | 4, 6, or 8 seconds |
Features:
· Main burner ignition using a 120V hot surface igniter.
· Flame rectification circuit to monitor flame presence.
· Monitoring of system pressure switch, high temperature limit, and rollout functions.
· Appliance operation/safety requirements controlled via microprocessor.
· Control of a standard induction-type circulating fan motor (based on appliance requirements), in response
to a conventional low voltage or EnviraCOM thermostat.
· LED system status, performance and diagnostic indication.
· Wire harnesses provided for simple replacement of most IFCs and integration with most heating and
cooling appliances.
· Twinning capability
· EnviraCOM communication capability to enable local and/or remote system status, diagnostics,
troubleshooting, and HVAC system control.
Application:
· Used with conventional thermostats as well as the EnviraCOM enabled VisionPRO IAQ and FocusPRO.
· Universal Integrated Furnace Control is intended for residential natural or liquid propane fueled furnaces
only.
